Non Metallic Axial Flow Pump Manufacturer and Exporter in India

Non Metallic Axial Flow Pump Technical Specifications and Performance Range

Our non metallic axial flow pump range, designated the AF model in non metallic and FRP construction, covers the following operating envelope:

• Head up to: 10 mtr.
• Flow up to: 2500m3/hr
• Material of construction:FRP/Non Metallic Axial Flow Pump.

This operating range positions our non metallic axial flow pumps as the correct solution for large volume, low pressure fluid transfer duties in corrosive environments, covering everything from effluent recirculation and chemical scrubbing to seawater handling and acid transfer in bulk quantities. The extended flow range of up to 2500 cubic metres per hour makes these pumps suitable for large scale treatment plant recirculation, industrial cooling and bulk acid or alkali transfer at high throughput.

Key Advantages of Non Metallic Axial Flow Pumps from Propeller Pumps

Choosing a non metallic axial flow pump over a conventional metallic pump in corrosive service environments delivers a series of measurable operational and financial advantages that accumulate over the service life of the equipment.

Total corrosion immunity is the primary advantage. Because the entire fluid contact zone is constructed from FRP or non metallic composite materials, there is no metallic surface available for chemical attack. This fundamentally eliminates the corrosion degradation mechanism that progressively reduces the hydraulic efficiency and mechanical integrity of metallic pumps operating in aggressive chemical service.

Extended service life follows directly from corrosion immunity. Non metallic axial flow pumps in corrosive chemical duty routinely outlast metallic alternatives by a considerable margin, reducing the frequency and cost of pump replacement over the lifetime of a plant.

Reduced maintenance burden is another significant benefit. Because the pump internals do not corrode or scale, maintenance interventions are less frequent and less complex than with metallic equipment. The solid moulded FRP construction also resists pitting, which is a common failure mode in metallic pumps handling chlorinated or acidic streams.

Lighter equipment weight compared to cast iron or steel alternatives simplifies installation and reduces structural loading on pump bases, supports and pipework, which is particularly valuable in elevated or mezzanine installations.

Zero product contamination is critical in industries where metallic ions introduced by pump corrosion would contaminate the process fluid or final product. Non metallic construction ensures that the pumped fluid is in contact only with chemically inert polymer surfaces throughout its passage through the pump.

Non Metallic Axial Flow Pump Applications in Corrosive and Aggressive Service

The non metallic axial flow pump is specifically selected for applications where the fluid being handled would attack, degrade or contaminate a metallic pump. Our AF model non metallic pumps are in active service across the following application areas:

Transfer of concentrated hydrochloric acid from road tankers and storage vessels to process points. Handling of sulphuric acid, nitric acid and mixed acid streams in chemical processing plants. Recirculation of electroplating bath solutions containing chromic acid, sulphuric acid and other aggressive metal finishing chemicals. Scrubbing of corrosive gases including chlorine, fluorine, bromine, sulphur dioxide, sulphur trioxide, ammonia and hydrogen chloride in scrubbing tower sump recirculation service.

Effluent treatment plant recirculation where pH extremes and aggressive chemical content are standard operating conditions. Seawater handling and desalination plant applications where chloride ion concentration would rapidly corrode metallic pump materials. Pickling and descaling solution circulation in steel rolling mills and metal treatment plants. Dye and pigment transfer in chemical manufacturing where coloured and reactive chemical compounds are handled in bulk.

Industries Served by Non Metallic Axial Flow Pumps

Our non metallic axial flow pumps are in service across dye and chemical manufacturing, pharmaceutical and bulk drug production, caustic soda and chlor alkali plants, thermal and atomic power station chemical handling, fertiliser production, copper and zinc smelter acid handling, steel plant pickling operations, titanium dioxide manufacturing, rayon and staple fibre production, and paper and pulp industry chemical handling.

Why Choose Propeller Pumps for Non Metallic Axial Flow Pumps

Propeller Pumps brings more than 16 years of focused experience in manufacturing non metallic and FRP pump equipment from its dedicated facility in Ahmedabad, Gujarat. This depth of manufacturing experience translates directly into pump designs that are hydraulically optimised for the specific low head and high flow duty conditions that characterise non metallic axial flow pump applications.

Our in house engineering capability allows us to work directly with customers on duty point optimisation, ensuring that each non metallic axial flow pump is sized and configured to operate at peak efficiency for the specific flow rate and head requirement of the installation. This application specific approach prevents the common problem of oversized or undersized pumps that waste energy and suffer premature wear.

Our quality controlled manufacturing process ensures that every FRP laminate, every moulded component and every assembled unit meets the dimensional and structural specifications required for reliable long term service in corrosive environments. Each pump undergoes hydrostatic testing before dispatch to confirm structural integrity and freedom from leakage paths.

Our global export capability and established logistics through Ahmedabad ensures reliable delivery to customers in UAE, Saudi Arabia, Singapore, Indonesia, Philippines, Egypt, Ethiopia, Nigeria, Kenya, Russia, Uzbekistan, Kazakhstan and other international markets.

Custom Solutions for Non Metallic Axial Flow Pump Requirements

Propeller Pumps offers comprehensive custom engineering services for non metallic axial flow pump applications that fall outside the standard product range or require specific configuration for the installation environment.

Custom solutions available include non metallic pump designs for duty points beyond the standard range, alternative polymer and composite material specifications for unusually aggressive fluid chemistry, custom flange drillings and connection configurations for integration with existing piping systems, special shaft seal configurations for specific containment requirements, and custom motor mounting and drive arrangements for unusual installation geometries.

Customers with non standard chemical service requirements are invited to provide their fluid composition, operating temperature, pH, specific gravity and required flow and head data, and our engineering team will confirm the most appropriate non metallic material and pump configuration for the duty.